You are looking at the documentation of a prior release. To read the documentation of the latest release, please visit here.

New to KubeDB? Please start here.

Monitoring ProxySQL with builtin Prometheus

This tutorial will show you how to monitor ProxySQL using builtin Prometheus scraper.

Before You Begin

  • At first, you need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. If you do not already have a cluster, you can create one by using kind.

  • Install KubeDB operator in your cluster following the steps here.

  • If you are not familiar with how to configure Prometheus to scrape metrics from various Kubernetes resources, please read the tutorial from here.

  • To learn how Prometheus monitoring works with KubeDB in general, please visit here.

  • To keep Prometheus resources isolated, we are going to use two different namespaces called,

    • monitoring to deploy respective monitoring resources
    • demo to deploy respective resources from KubeDB
    $ kubectl create ns monitoring
    namespace/monitoring created
    
    $ kubectl create ns demo
    namespace/demo created
    

Note: YAML files used in this tutorial are stored in docs/examples/proxysql folder in GitHub repository kubedb/docs.

Deploy Sample MySQL Group Replication

At first, let’s deploy a MySQL database with Group Replication support. Below is the MySQL object that we are going to create.

apiVersion: kubedb.com/v1alpha2
kind: MySQL
metadata:
  name: my-group
  namespace: demo
spec:
  version: "5.7.33-v1"
  replicas: 3
  topology:
    mode: GroupReplication
    group:
      name: "dc002fc3-c412-4d18-b1d4-66c1fbfbbc9b"
  storageType: Durable
  storage:
    storageClassName: "standard"
    accessModes:
      - ReadWriteOnce
    resources:
      requests:
        storage: 1Gi
  terminationPolicy: WipeOut

Let’s create the MySQL object we have shown above.

$ kubectl apply -f https://github.com/kubedb/docs/raw/v2021.06.23/docs/examples/proxysql/demo-my-group.yaml
mysql.kubedb.com/my-group created

Now, wait for the database to go into the Running state.

$ kubectl get my -n demo my-group
NAME       VERSION   STATUS    AGE
my-group   5.7.25    Running   3m

Deploy ProxySQL with Monitoring Enabled

Now we are going to create a sample ProxySQL object to load balance the previously created MySQL group. Keep note that monitoring is enabled in this sample ProxySQL object. See below:

apiVersion: kubedb.com/v1alpha2
kind: ProxySQL
metadata:
  name: builtin-prom-proxysql
  namespace: demo
spec:
  version: "2.0.4"
  replicas: 1
  mode: GroupReplication
  backend:
    ref:
      apiGroup: "kubedb.com"
      kind: MySQL
      name: my-group
    replicas: 3
  monitor:
    agent: prometheus.io/builtin
    prometheus:
      exporter:
        port: 42004
  • .spec.monitor.agent: prometheus.io/builtin specifies that we are going to monitor this server using builtin Prometheus scraper.

Let’s create the ProxySQL object we have shown above.

$ kubectl apply -f https://github.com/kubedb/docs/raw/v2021.06.23/docs/examples/proxysql/builtin-prom-proxysql.yaml
proxysql.kubedb.com/builtin-prom-proxysql created

Now, wait for the ProxySQL object to go into the Running state.

$ kubectl get proxysql -n demo builtin-prom-proxysql
NAME                    VERSION   STATUS    AGE
builtin-prom-proxysql   2.0.4     Running   3m

KubeDB will create a separate stats service with the name {ProxySQL object name}-stats for monitoring purposes.

$ kubectl get svc -n demo --selector="proxysql.app.kubernetes.io/instance=builtin-prom-proxysql"
NAME                          TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)     AGE
builtin-prom-proxysql         ClusterIP   10.101.12.24    <none>        6033/TCP    23m
builtin-prom-proxysql-stats   ClusterIP   10.97.112.192   <none>        42004/TCP   23m

Here, builtin-prom-proxysql-stats service has been created for monitoring purposes. Let’s describe the service.

$ kubectl describe svc -n demo builtin-prom-proxysql-stats
Name:              builtin-prom-proxysql-stats
Namespace:         demo
Labels:            app.kubernetes.io/name=proxysqls.kubedb.com
                   kubedb.com/role=stats
                   proxysql.kubedb.com/load-balance=GroupReplication
                   proxysql.app.kubernetes.io/instance=builtin-prom-proxysql
Annotations:       monitoring.appscode.com/agent: prometheus.io/builtin
                   prometheus.io/path: /metrics
                   prometheus.io/port: 42004
                   prometheus.io/scrape: true
Selector:          app.kubernetes.io/name=proxysqls.kubedb.com,proxysql.kubedb.com/load-balance=GroupReplication,proxysql.app.kubernetes.io/instance=builtin-prom-proxysql
Type:              ClusterIP
IP:                10.97.112.192
Port:              prom-http  42004/TCP
TargetPort:        prom-http/TCP
Endpoints:         10.244.1.6:42004
Session Affinity:  None
Events:            <none>

You can see that the service contains the following annotations.

prometheus.io/path: /metrics
prometheus.io/port: 42004
prometheus.io/scrape: true

The Prometheus server will discover the service endpoint using these specifications and will scrape metrics from the exporter.

Configure Prometheus Server

Now, we have to configure a Prometheus scraping job to scrape the metrics using this service. We are going to configure scraping jobs similar to this kubernetes-service-endpoints job that scrapes metrics from endpoints of a service.

Let’s configure a Prometheus scraping job to collect metrics from this service.

- job_name: 'kubedb-databases'
  honor_labels: true
  scheme: http
  kubernetes_sd_configs:
  - role: endpoints
  # by default Prometheus server select all kubernetes services as possible target.
  # relabel_config is used to filter only desired endpoints
  relabel_configs:
  # keep only those services that has "prometheus.io/scrape","prometheus.io/path" and "prometheus.io/port" anootations
  - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scrape, __meta_kubernetes_service_annotation_prometheus_io_port]
    separator: ;
    regex: true;(.*)
    action: keep
  # currently KubeDB supported databases uses only "http" scheme to export metrics. so, drop any service that uses "https" scheme.
  - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scheme]
    action: drop
    regex: https
  # only keep the stats services created by KubeDB for monitoring purpose which has "-stats" suffix
  - source_labels: [__meta_kubernetes_service_name]
    separator: ;
    regex: (.*-stats)
    action: keep
  # service created by KubeDB will have "app.kubernetes.io/name" and "app.kubernetes.io/instance" annotations. keep only those services that have these annotations.
  - source_labels: [__meta_kubernetes_service_label_app_kubernetes_io_name]
    separator: ;
    regex: (.*)
    action: keep
  # read the metric path from "prometheus.io/path: <path>" annotation
  - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_path]
    action: replace
    target_label: __metrics_path__
    regex: (.+)
  # read the port from "prometheus.io/port: <port>" annotation and update scraping address accordingly
  - source_labels: [__address__, __meta_kubernetes_service_annotation_prometheus_io_port]
    action: replace
    target_label: __address__
    regex: ([^:]+)(?::\d+)?;(\d+)
    replacement: $1:$2
  # add service namespace as label to the scraped metrics
  - source_labels: [__meta_kubernetes_namespace]
    separator: ;
    regex: (.*)
    target_label: namespace
    replacement: $1
    action: replace
  # add service name as a label to the scraped metrics
  - source_labels: [__meta_kubernetes_service_name]
    separator: ;
    regex: (.*)
    target_label: service
    replacement: $1
    action: replace
  # add stats service's labels to the scraped metrics
  - action: labelmap
    regex: __meta_kubernetes_service_label_(.+)

Configure Existing Prometheus Server

If you already have a Prometheus server running, you have to add the above scraping job in the ConfigMap used to configure the Prometheus server. Then, you have to restart it for the updated configuration to take effect.

If you don’t use a persistent volume for Prometheus storage, you will lose your previously scraped data on restart.

Deploy New Prometheus Server

If you don’t have any existing Prometheus server running, you have to deploy one. In this section, we are going to deploy a Prometheus server in monitoring namespace to collect metrics using this stats service.

Create ConfigMap:

At first, create a ConfigMap with the scraping configuration. Bellow, the YAML of ConfigMap that we are going to create in this tutorial.

apiVersion: v1
kind: ConfigMap
metadata:
  name: prometheus-config
  labels:
    app: prometheus-demo
  namespace: monitoring
data:
  prometheus.yml: |-
    global:
      scrape_interval: 5s
      evaluation_interval: 5s
    scrape_configs:
    - job_name: 'kubedb-databases'
      honor_labels: true
      scheme: http
      kubernetes_sd_configs:
      - role: endpoints
      # by default Prometheus server select all kubernetes services as possible target.
      # relabel_config is used to filter only desired endpoints
      relabel_configs:
      # keep only those services that has "prometheus.io/scrape","prometheus.io/path" and "prometheus.io/port" anootations
      - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scrape, __meta_kubernetes_service_annotation_prometheus_io_port]
        separator: ;
        regex: true;(.*)
        action: keep
      # currently KubeDB supported databases uses only "http" scheme to export metrics. so, drop any service that uses "https" scheme.
      - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scheme]
        action: drop
        regex: https
      # only keep the stats services created by KubeDB for monitoring purpose which has "-stats" suffix
      - source_labels: [__meta_kubernetes_service_name]
        separator: ;
        regex: (.*-stats)
        action: keep
      # service created by KubeDB will have "app.kubernetes.io/name" and "app.kubernetes.io/instance" annotations. keep only those services that have these annotations.
      - source_labels: [__meta_kubernetes_service_label_app_kubernetes_io_name]
        separator: ;
        regex: (.*)
        action: keep
      # read the metric path from "prometheus.io/path: <path>" annotation
      - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_path]
        action: replace
        target_label: __metrics_path__
        regex: (.+)
      # read the port from "prometheus.io/port: <port>" annotation and update scraping address accordingly
      - source_labels: [__address__, __meta_kubernetes_service_annotation_prometheus_io_port]
        action: replace
        target_label: __address__
        regex: ([^:]+)(?::\d+)?;(\d+)
        replacement: $1:$2
      # add service namespace as label to the scraped metrics
      - source_labels: [__meta_kubernetes_namespace]
        separator: ;
        regex: (.*)
        target_label: namespace
        replacement: $1
        action: replace
      # add service name as a label to the scraped metrics
      - source_labels: [__meta_kubernetes_service_name]
        separator: ;
        regex: (.*)
        target_label: service
        replacement: $1
        action: replace
      # add stats service's labels to the scraped metrics
      - action: labelmap
        regex: __meta_kubernetes_service_label_(.+)    

Let’s create above ConfigMap,

$ kubectl apply -f https://github.com/kubedb/docs/raw/v2021.06.23/docs/examples/monitoring/builtin-prometheus/prom-config.yaml
configmap/prometheus-config created

Create RBAC:

If you are using an RBAC enabled cluster, you have to give necessary RBAC permissions for Prometheus. Let’s create necessary RBAC stuff for Prometheus,

$ kubectl apply -f https://github.com/appscode/third-party-tools/raw/master/monitoring/prometheus/builtin/artifacts/rbac.yaml
clusterrole.rbac.authorization.k8s.io/prometheus created
serviceaccount/prometheus created
clusterrolebinding.rbac.authorization.k8s.io/prometheus created

YAML for the RBAC resources created above can be found here.

Deploy Prometheus:

Now, we are ready to deploy the Prometheus server. We are going to use the following deployment to deploy the Prometheus server.

Let’s deploy the Prometheus server.

$ kubectl apply -f https://github.com/appscode/third-party-tools/raw/master/monitoring/prometheus/builtin/artifacts/deployment.yaml
deployment.apps/prometheus created

Verify Monitoring Metrics

Prometheus server is listening to port 9090. We are going to use port forwarding to access Prometheus dashboard.

At first, let’s check if the Prometheus pod is in Running state.

$ kubectl get pod -n monitoring -l=app=prometheus
NAME                          READY   STATUS    RESTARTS   AGE
prometheus-789c9695fc-v8gjg   1/1     Running   0          27s

Now, run the following command on a separate terminal to forward 9090 port of prometheus-789c9695fc-v8gjg pod,

$ kubectl port-forward -n monitoring prometheus-8568c86d86-95zhn 9090
Forwarding from 127.0.0.1:9090 -> 9090
Forwarding from [::1]:9090 -> 9090

Now, we can access the dashboard at localhost:9090. Open http://localhost:9090 in your browser. You should see the endpoint of builtin-prom-proxysql-stats service as one of the targets.

  Prometheus Target

Check the labels marked with the red rectangles. These labels confirm that the metrics are coming from ProxySQL database builtin-prom-proxysql through stats service builtin-prom-proxysql-stats.

Now, you can view the collected metrics and create a graph from the homepage of this Prometheus dashboard. You can also use this Prometheus server as a data source for Grafana and create a beautiful dashboard with collected metrics.

Cleaning up

To clean up the Kubernetes resources created by this tutorial, run following commands

$ kubectl delete -n monitoring deployment.apps/prometheus

$ kubectl delete -n monitoring clusterrole.rbac.authorization.k8s.io/prometheus
$ kubectl delete -n monitoring serviceaccount/prometheus
$ kubectl delete -n monitoring clusterrolebinding.rbac.authorization.k8s.io/prometheus

$ kubectl delete -n demo proxysql/builtin-prom-proxysql
$ kubectl delete -n demo my/my-group

$ kubectl delete ns demo
$ kubectl delete ns monitoring

Next Steps