New to KubeDB? Please start here.

Monitoring Druid with builtin Prometheus

This tutorial will show you how to monitor Druid cluster using builtin Prometheus scraper.

Before You Begin

At first, you need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. If you do not already have a cluster, you can create one by using kind.
Install KubeDB operator in your cluster following the steps here.
If you are not familiar with how to configure Prometheus to scrape metrics from various Kubernetes resources, please read the tutorial from here.
To learn how Prometheus monitoring works with KubeDB in general, please visit here.
To keep Prometheus resources isolated, we are going to use a separate namespace called monitoring to deploy respective monitoring resources. We are going to deploy database in demo namespace.
```
$ kubectl create ns monitoring
namespace/monitoring created

$ kubectl create ns demo
namespace/demo created
```

Note: YAML files used in this tutorial are stored in docs/examples/druid folder in GitHub repository kubedb/docs.

Deploy Druid with Monitoring Enabled

At first, let’s deploy a Druid cluster with monitoring enabled. Below is the Druid object that we are going to create.

apiVersion: kubedb.com/v1alpha2
kind: Druid
metadata:
  name: druid-with-monitoring
  namespace: demo
spec:
  version: 28.0.1
  deepStorage:
    type: s3
    configSecret:
      name: deep-storage-config
  topology:
    routers:
      replicas: 1
  monitor:
    agent: prometheus.io/builtin
    prometheus:
      exporter:
        port: 56790
      serviceMonitor:
        labels:
          release: prometheus
        interval: 10s
  deletionPolicy: WipeOut

Here,

spec.monitor.agent: prometheus.io/builtin specifies that we are going to monitor this server using builtin Prometheus scraper.
spec.monitor.prometheus.exporter.port: 56790 specifies the port where the exporter is running.

Let’s create the Druid crd we have shown above.

$ kubectl apply -f https://github.com/kubedb/docs/raw/v2024.11.18/docs/guides/druid/monitoring/yamls/druid-builtin-monitoring.yaml
druid.kubedb.com/druid-with-monitoring created

Now, wait for the cluster to go into Ready state.

NAME                    TYPE                  VERSION    STATUS           AGE
druid-with-monitoring   kubedb.com/v1alpha2   28.0.1     Ready          31s

KubeDB will create a separate stats service with name {Druid crd name}-stats for monitoring purpose.

$ kubectl get svc -n demo --selector="app.kubernetes.io/instance=druid-with-monitoring"
NAME                                  TYPE          CLUSTER-IP      EXTERNAL-IP   PORT(S)                                                  AGE
druid-with-monitoring-brokers         ClusterIP     10.96.28.252    <none>        8082/TCP                                                2m13s
druid-with-monitoring-coordinators    ClusterIP     10.96.52.186    <none>        8081/TCP                                                2m13s
druid-with-monitoring-pods            ClusterIP     None            <none>        8081/TCP,8090/TCP,8083/TCP,8091/TCP,8082/TCP,8888/TCP   2m13s
druid-with-monitoring-routers         ClusterIP     10.96.134.202   <none>        8888/TCP                                                2m13s
druid-with-monitoring-stats           ClusterIP     10.96.222.96    <none>        56790/TCP                                               2m13s

Here, druid-with-monitoring-stats service has been created for monitoring purpose. Let’s describe the service.

$ kubectl describe svc -n druid-demo builtin-prom-stats
Name:              druid-with-monitoring-stats
Namespace:         demo
Labels:            app.kubernetes.io/component=database
                   app.kubernetes.io/instance=druid-with-monitoring
                   app.kubernetes.io/managed-by=kubedb.com
                   app.kubernetes.io/name=druids.kubedb.com
                   kubedb.com/role=stats
Annotations:       monitoring.appscode.com/agent: prometheus.io/builtin
                   prometheus.io/path: /metrics
                   prometheus.io/port: 56790
                   prometheus.io/scrape: true
Selector:          app.kubernetes.io/instance=druid-with-monitoring,app.kubernetes.io/managed-by=kubedb.com,app.kubernetes.io/name=druids.kubedb.com
Type:              ClusterIP
IP Family Policy:  SingleStack
IP Families:       IPv4
IP:                10.96.222.96
IPs:               10.96.222.96
Port:              metrics  56790/TCP
TargetPort:        metrics/TCP
Endpoints:         10.244.0.31:56790,10.244.0.33:56790
Session Affinity:  None
Events:            <none>

You can see that the service contains following annotations.

prometheus.io/path: /metrics
prometheus.io/port: 56790
prometheus.io/scrape: true

The Prometheus server will discover the service endpoint using these specifications and will scrape metrics from the exporter.

Configure Prometheus Server

Now, we have to configure a Prometheus scraping job to scrape the metrics using this service. We are going to configure scraping job similar to this kubernetes-service-endpoints job that scrapes metrics from endpoints of a service.

Let’s configure a Prometheus scraping job to collect metrics from this service.

- job_name: 'kubedb-databases'
  honor_labels: true
  scheme: http
  kubernetes_sd_configs:
  - role: endpoints
  # by default Prometheus server select all Kubernetes services as possible target.
  # relabel_config is used to filter only desired endpoints
  relabel_configs:
  # keep only those services that has "prometheus.io/scrape","prometheus.io/path" and "prometheus.io/port" anootations
  - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scrape, __meta_kubernetes_service_annotation_prometheus_io_port]
    separator: ;
    regex: true;(.*)
    action: keep
  # currently KubeDB supported databases uses only "http" scheme to export metrics. so, drop any service that uses "https" scheme.
  - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scheme]
    action: drop
    regex: https
  # only keep the stats services created by KubeDB for monitoring purpose which has "-stats" suffix
  - source_labels: [__meta_kubernetes_service_name]
    separator: ;
    regex: (.*-stats)
    action: keep
  # service created by KubeDB will have "app.kubernetes.io/name" and "app.kubernetes.io/instance" annotations. keep only those services that have these annotations.
  - source_labels: [__meta_kubernetes_service_label_app_kubernetes_io_name]
    separator: ;
    regex: (.*)
    action: keep
  # read the metric path from "prometheus.io/path: <path>" annotation
  - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_path]
    action: replace
    target_label: __metrics_path__
    regex: (.+)
  # read the port from "prometheus.io/port: <port>" annotation and update scraping address accordingly
  - source_labels: [__address__, __meta_kubernetes_service_annotation_prometheus_io_port]
    action: replace
    target_label: __address__
    regex: ([^:]+)(?::\d+)?;(\d+)
    replacement: $1:$2
  # add service namespace as label to the scraped metrics
  - source_labels: [__meta_kubernetes_namespace]
    separator: ;
    regex: (.*)
    target_label: namespace
    replacement: $1
    action: replace
  # add service name as a label to the scraped metrics
  - source_labels: [__meta_kubernetes_service_name]
    separator: ;
    regex: (.*)
    target_label: service
    replacement: $1
    action: replace
  # add stats service's labels to the scraped metrics
  - action: labelmap
    regex: __meta_kubernetes_service_label_(.+)

Configure Existing Prometheus Server

If you already have a Prometheus server running, you have to add above scraping job in the ConfigMap used to configure the Prometheus server. Then, you have to restart it for the updated configuration to take effect.

If you don’t use a persistent volume for Prometheus storage, you will lose your previously scraped data on restart.

Deploy New Prometheus Server

If you don’t have any existing Prometheus server running, you have to deploy one. In this section, we are going to deploy a Prometheus server in monitoring namespace to collect metrics using this stats service.

Create ConfigMap:

At first, create a ConfigMap with the scraping configuration. Bellow, the YAML of ConfigMap that we are going to create in this tutorial.

apiVersion: v1
kind: ConfigMap
metadata:
  name: prometheus-config
  labels:
    app: prometheus-demo
  namespace: monitoring
data:
  prometheus.yml: |-
    global:
      scrape_interval: 5s
      evaluation_interval: 5s
    scrape_configs:
    - job_name: 'kubedb-databases'
      honor_labels: true
      scheme: http
      kubernetes_sd_configs:
      - role: endpoints
      # by default Prometheus server select all Kubernetes services as possible target.
      # relabel_config is used to filter only desired endpoints
      relabel_configs:
      # keep only those services that has "prometheus.io/scrape","prometheus.io/path" and "prometheus.io/port" anootations
      - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scrape, __meta_kubernetes_service_annotation_prometheus_io_port]
        separator: ;
        regex: true;(.*)
        action: keep
      # currently KubeDB supported databases uses only "http" scheme to export metrics. so, drop any service that uses "https" scheme.
      - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scheme]
        action: drop
        regex: https
      # only keep the stats services created by KubeDB for monitoring purpose which has "-stats" suffix
      - source_labels: [__meta_kubernetes_service_name]
        separator: ;
        regex: (.*-stats)
        action: keep
      # service created by KubeDB will have "app.kubernetes.io/name" and "app.kubernetes.io/instance" annotations. keep only those services that have these annotations.
      - source_labels: [__meta_kubernetes_service_label_app_kubernetes_io_name]
        separator: ;
        regex: (.*)
        action: keep
      # read the metric path from "prometheus.io/path: <path>" annotation
      - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_path]
        action: replace
        target_label: __metrics_path__
        regex: (.+)
      # read the port from "prometheus.io/port: <port>" annotation and update scraping address accordingly
      - source_labels: [__address__, __meta_kubernetes_service_annotation_prometheus_io_port]
        action: replace
        target_label: __address__
        regex: ([^:]+)(?::\d+)?;(\d+)
        replacement: $1:$2
      # add service namespace as label to the scraped metrics
      - source_labels: [__meta_kubernetes_namespace]
        separator: ;
        regex: (.*)
        target_label: namespace
        replacement: $1
        action: replace
      # add service name as a label to the scraped metrics
      - source_labels: [__meta_kubernetes_service_name]
        separator: ;
        regex: (.*)
        target_label: service
        replacement: $1
        action: replace
      # add stats service's labels to the scraped metrics
      - action: labelmap
        regex: __meta_kubernetes_service_label_(.+)

Let’s create above ConfigMap,

$ kubectl apply -f https://github.com/kubedb/docs/raw/v2024.11.18/docs/examples/monitoring/builtin-prometheus/prom-config.yaml
configmap/prometheus-config created

Create RBAC:

If you are using an RBAC enabled cluster, you have to give necessary RBAC permissions for Prometheus. Let’s create necessary RBAC stuffs for Prometheus,

$ kubectl apply -f https://github.com/appscode/third-party-tools/raw/master/monitoring/prometheus/builtin/artifacts/rbac.yaml
clusterrole.rbac.authorization.k8s.io/prometheus created
serviceaccount/prometheus created
clusterrolebinding.rbac.authorization.k8s.io/prometheus created

YAML for the RBAC resources created above can be found here.

Deploy Prometheus:

Now, we are ready to deploy Prometheus server. We are going to use following deployment to deploy Prometheus server.

Let’s deploy the Prometheus server.

$ kubectl apply -f https://github.com/appscode/third-party-tools/raw/master/monitoring/prometheus/builtin/artifacts/deployment.yaml
deployment.apps/prometheus created

Verify Monitoring Metrics

Prometheus server is listening to port 9090. We are going to use port forwarding to access Prometheus dashboard.

At first, let’s check if the Prometheus pod is in Running state.

$ kubectl get pod -n monitoring -l=app=prometheus
NAME                          READY   STATUS    RESTARTS   AGE
prometheus-7bd56c6865-8dlpv   1/1     Running   0          28s

Now, run following command on a separate terminal to forward 9090 port of prometheus-7bd56c6865-8dlpv pod,

$ kubectl port-forward -n monitoring prometheus-7bd56c6865-8dlpv 9090
Forwarding from 127.0.0.1:9090 -> 9090
Forwarding from [::1]:9090 -> 9090

Now, we can access the dashboard at localhost:9090. Open http://localhost:9090 in your browser. You should see the endpoint of druid-with-monitoring-stats service as one of the targets.

Prometheus Target

Check the labels marked with red rectangle. These labels confirm that the metrics are coming from Druid cluster druid-with-monitoring through stats service druid-with-monitoring-stats.

Now, you can view the collected metrics and create a graph from homepage of this Prometheus dashboard. You can also use this Prometheus server as data source for Grafana and create beautiful dashboard with collected metrics.

Cleaning up

To cleanup the Kubernetes resources created by this tutorial, run following commands

kubectl delete -n demo druid/druid-with-monitoring

kubectl delete -n monitoring deployment.apps/prometheus

kubectl delete -n monitoring clusterrole.rbac.authorization.k8s.io/prometheus
kubectl delete -n monitoring serviceaccount/prometheus
kubectl delete -n monitoring clusterrolebinding.rbac.authorization.k8s.io/prometheus

kubectl delete ns demo
kubectl delete ns monitoring

Next Steps

Learn how to configure Druid Topology.
Monitor your Druid database with KubeDB using out-of-the-box Prometheus operator.
Want to hack on KubeDB? Check our contribution guidelines.

KubeDB

Stash

KubeVault

Voyager

ConfigSyncer

Guard

RESOURCES

Druid

Elasticsearch

FerretDB

Kafka

MariaDB

Memcached

Microsoft SQL Server

MongoDB

MySQL

OpenSearch

PerconaXtraDB

PgBouncer

Pgpool

PostgreSQL

ProxySQL

RabbitMQ

Redis

SingleStore

Solr

ZooKeeper