New to KubeDB? Please start here.

Refreshing a Elasticsearch Branch

Set spec.schedule.cron to periodically replace branch data with a fresh source snapshot. This guide deploys its own source and scheduled branch, changes both sides, and verifies what a completed refresh preserves and replaces.

What happens during refresh

  1. Courier advances the refresh generation and takes fresh source snapshots.
  2. It imports snapshot references into the target namespace, pauses the target, and replaces its cloned volumes.
  3. KubeDB restarts the target using the new volumes.
  4. After the target and any configured preparation complete, the Branch returns to Ready; Courier releases the previous generation’s snapshots.

Refresh discards branch-only writes and temporarily interrupts the target. It replaces data rather than merging changes. The source remains independent. If configured, password reset and post-actions run again on each refresh.

Before You Begin

  • Read the branching overview.
  • Complete Courier setup, including KubeDB and the Branch CRD. Use branching-capable Courier, provisioner, and database images.
  • Ensure ElasticsearchVersion xpack-8.18.8 is available in your installed catalog.
  • Use Ceph RBD storage with copy-on-write cloning, compatible VolumeSnapshot and VolumeGroupSnapshot classes, and the corresponding CSI APIs, controllers, and driver support.
  • Review the snapshot requirements. Your account must be able to create databases and Branches, read auth Secrets, inspect snapshots and Jobs, and open pod shells.
  • Allow capacity for three source and three target database pods, each requesting 2Gi of memory, plus operators and action Jobs.

The source uses demo; the target uses dev. Replace ceph-rbd consistently if your Ceph StorageClass has another name. Reserve the tutorial names and create namespaces if they do not already exist:

kubectl create namespace demo
kubectl create namespace dev

Deploy the source database

Save the following as elasticsearch-refresh-source.yaml. It creates a three-node combined cluster:

apiVersion: kubedb.com/v1
kind: Elasticsearch
metadata:
  name: elasticsearch-refresh-source
  namespace: demo
spec:
  version: xpack-8.18.8
  replicas: 3
  enableSSL: false
  podTemplate:
    spec:
      containers:
      - name: elasticsearch
        resources:
          requests:
            cpu: 500m
            memory: 2Gi
          limits:
            memory: 2Gi
  storageType: Durable
  storage:
    storageClassName: ceph-rbd
    accessModes:
    - ReadWriteOnce
    resources:
      requests:
        storage: 2Gi
  deletionPolicy: WipeOut
kubectl -n demo apply -f elasticsearch-refresh-source.yaml
kubectl -n demo wait elasticsearch/elasticsearch-refresh-source --for=jsonpath='{.status.phase}'=Ready --timeout=30m

HTTP authentication remains enabled. enableSSL: false uses HTTP for the client API; Elasticsearch transport traffic has its own encryption configuration.

Seed and inspect the source data

Discover the auth Secret referenced by elasticsearch-refresh-source:

kubectl -n demo get elasticsearch elasticsearch-refresh-source -o jsonpath='{.spec.authSecret.name}{"\n"}'
elasticsearch-refresh-source-auth

Use the returned name below if it differs. Read its password:

kubectl -n demo get secret elasticsearch-refresh-source-auth -o jsonpath='{.data.password}' | base64 -d

Enter this password when the client prompts.

From your terminal, open a pod shell:

kubectl -n demo exec -it elasticsearch-refresh-source-0 -c elasticsearch -- bash

Run the following curl commands inside the pod shell. --user elastic prompts for the decoded password on each request. Requests use the database Service.

Create five customers. Expected results below omit connection banners and are formatted for readability.

curl --silent --show-error --fail-with-body --user elastic \
  -X PUT "http://elasticsearch-refresh-source.demo.svc:9200/customers" \
  -H 'Content-Type: application/json' \
  --data '{"mappings":{"properties":{"id":{"type":"integer"}}}}'
curl --silent --show-error --fail-with-body --user elastic \
  -X PUT "http://elasticsearch-refresh-source.demo.svc:9200/customers/_doc/1" \
  -H 'Content-Type: application/json' \
  --data '{"id":1,"full_name":"Customer 1","email":"[email protected]"}'
curl --silent --show-error --fail-with-body --user elastic \
  -X PUT "http://elasticsearch-refresh-source.demo.svc:9200/customers/_doc/2" \
  -H 'Content-Type: application/json' \
  --data '{"id":2,"full_name":"Customer 2","email":"[email protected]"}'
curl --silent --show-error --fail-with-body --user elastic \
  -X PUT "http://elasticsearch-refresh-source.demo.svc:9200/customers/_doc/3" \
  -H 'Content-Type: application/json' \
  --data '{"id":3,"full_name":"Customer 3","email":"[email protected]"}'
curl --silent --show-error --fail-with-body --user elastic \
  -X PUT "http://elasticsearch-refresh-source.demo.svc:9200/customers/_doc/4" \
  -H 'Content-Type: application/json' \
  --data '{"id":4,"full_name":"Customer 4","email":"[email protected]"}'
curl --silent --show-error --fail-with-body --user elastic \
  -X PUT "http://elasticsearch-refresh-source.demo.svc:9200/customers/_doc/5" \
  -H 'Content-Type: application/json' \
  --data '{"id":5,"full_name":"Customer 5","email":"[email protected]"}'

Refresh makes the documents searchable; flush commits pending index changes before the example storage snapshot:

curl --silent --show-error --fail-with-body --user elastic \
  -X POST "http://elasticsearch-refresh-source.demo.svc:9200/_refresh"
curl --silent --show-error --fail-with-body --user elastic \
  -X POST "http://elasticsearch-refresh-source.demo.svc:9200/_flush"
curl --silent --show-error --fail-with-body --user elastic \
  -X GET "http://elasticsearch-refresh-source.demo.svc:9200/customers/_count?filter_path=count&pretty"
{
  "count": 5
}
curl --silent --show-error --fail-with-body --user elastic \
  -X GET "http://elasticsearch-refresh-source.demo.svc:9200/customers/_search?size=5&sort=id:asc&filter_path=hits.hits._source&pretty"
{
  "hits": {
    "hits": [
      {"_source": {"id": 1, "full_name": "Customer 1", "email": "[email protected]"}},
      {"_source": {"id": 2, "full_name": "Customer 2", "email": "[email protected]"}},
      {"_source": {"id": 3, "full_name": "Customer 3", "email": "[email protected]"}},
      {"_source": {"id": 4, "full_name": "Customer 4", "email": "[email protected]"}},
      {"_source": {"id": 5, "full_name": "Customer 5", "email": "[email protected]"}}
    ]
  }
}

Run exit to return to your terminal.

Create a scheduled Branch

The example runs on ten-minute clock boundaries, such as 10:00, 10:10, and 10:20; it is not a ten-minute timer from creation.

Save the following as elasticsearch-refresh-branch.yaml:

apiVersion: courier.kubedb.com/v1alpha1
kind: Branch
metadata:
  name: elasticsearch-refresh-branch
  namespace: demo
spec:
  source:
    databaseRef:
      apiGroup: kubedb.com
      kind: Elasticsearch
      name: elasticsearch-refresh-source
    namespace: demo
  target:
    namespace: dev
    name: elasticsearch-refresh-branch
    storageClassName: ceph-rbd
    resources:
      requests:
        cpu: 500m
        memory: 2Gi
      limits:
        memory: 2Gi
  schedule:
    cron: '*/10 * * * *'
  historyLimit:
    success: 3
    failed: 2
  deletionPolicy: Delete
kubectl -n demo apply -f elasticsearch-refresh-branch.yaml
kubectl -n demo wait branch/elasticsearch-refresh-branch --for=condition=Ready --timeout=60m
kubectl -n demo get branch elasticsearch-refresh-branch

Courier creates elasticsearch/elasticsearch-refresh-branch and its cloned PVCs in dev; KubeDB provisions the target database.

Check the initial copy

Discover the auth Secret referenced by elasticsearch-refresh-branch:

kubectl -n dev get elasticsearch elasticsearch-refresh-branch -o jsonpath='{.spec.authSecret.name}{"\n"}'
elasticsearch-refresh-branch-auth

Use the returned name below if it differs. Read its password:

kubectl -n dev get secret elasticsearch-refresh-branch-auth -o jsonpath='{.data.password}' | base64 -d

Enter this password when the client prompts.

From your terminal, open a pod shell:

kubectl -n dev exec -it elasticsearch-refresh-branch-0 -c elasticsearch -- bash

Run the following curl commands inside the pod shell. --user elastic prompts for the decoded password on each request. Requests use the database Service.

curl --silent --show-error --fail-with-body --user elastic \
  -X GET "http://elasticsearch-refresh-branch.dev.svc:9200/customers/_count?filter_path=count&pretty"
{
  "count": 5
}
curl --silent --show-error --fail-with-body --user elastic \
  -X GET "http://elasticsearch-refresh-branch.dev.svc:9200/customers/_search?size=5&sort=id:asc&filter_path=hits.hits._source&pretty"
{
  "hits": {
    "hits": [
      {"_source": {"id": 1, "full_name": "Customer 1", "email": "[email protected]"}},
      {"_source": {"id": 2, "full_name": "Customer 2", "email": "[email protected]"}},
      {"_source": {"id": 3, "full_name": "Customer 3", "email": "[email protected]"}},
      {"_source": {"id": 4, "full_name": "Customer 4", "email": "[email protected]"}},
      {"_source": {"id": 5, "full_name": "Customer 5", "email": "[email protected]"}}
    ]
  }
}

Run exit to return to your terminal.

Record the current generation and schedule

kubectl -n demo get branch elasticsearch-refresh-branch -o custom-columns='NAME:.metadata.name,PHASE:.status.phase,GENERATION:.status.refreshGeneration,LAST-SUCCESS:.status.lastSuccessfulRefreshTime,NEXT:.status.nextRefreshTime'

Record the generation and successful completion timestamp before making the following edits. Initial generation 0 can appear as <none>. Make both edits before the next scheduled run; if one starts while you are editing, finish the edits and wait for a subsequent generation. Runs that are still active can cause scheduled ticks to be skipped.

Change source and branch data

Update the source

Discover the auth Secret referenced by elasticsearch-refresh-source:

kubectl -n demo get elasticsearch elasticsearch-refresh-source -o jsonpath='{.spec.authSecret.name}{"\n"}'
elasticsearch-refresh-source-auth

Use the returned name below if it differs. Read its password:

kubectl -n demo get secret elasticsearch-refresh-source-auth -o jsonpath='{.data.password}' | base64 -d

Enter this password when the client prompts.

From your terminal, open a pod shell:

kubectl -n demo exec -it elasticsearch-refresh-source-0 -c elasticsearch -- bash

Run the following curl commands inside the pod shell. --user elastic prompts for the decoded password on each request. Requests use the database Service.

curl --silent --show-error --fail-with-body --user elastic \
  -X POST "http://elasticsearch-refresh-source.demo.svc:9200/customers/_update/1?refresh=true" \
  -H 'Content-Type: application/json' \
  --data '{"doc":{"full_name":"Updated Customer 1"}}'
curl --silent --show-error --fail-with-body --user elastic \
  -X POST "http://elasticsearch-refresh-source.demo.svc:9200/_flush"
curl --silent --show-error --fail-with-body --user elastic \
  -X GET "http://elasticsearch-refresh-source.demo.svc:9200/customers/_count?filter_path=count&pretty"
{
  "count": 5
}
curl --silent --show-error --fail-with-body --user elastic \
  -X GET "http://elasticsearch-refresh-source.demo.svc:9200/customers/_search?size=5&sort=id:asc&filter_path=hits.hits._source&pretty"
{
  "hits": {
    "hits": [
      {"_source": {"id": 1, "full_name": "Updated Customer 1", "email": "[email protected]"}},
      {"_source": {"id": 2, "full_name": "Customer 2", "email": "[email protected]"}},
      {"_source": {"id": 3, "full_name": "Customer 3", "email": "[email protected]"}},
      {"_source": {"id": 4, "full_name": "Customer 4", "email": "[email protected]"}},
      {"_source": {"id": 5, "full_name": "Customer 5", "email": "[email protected]"}}
    ]
  }
}

Run exit to return to your terminal.

Make a branch-only change

Discover the auth Secret referenced by elasticsearch-refresh-branch:

kubectl -n dev get elasticsearch elasticsearch-refresh-branch -o jsonpath='{.spec.authSecret.name}{"\n"}'
elasticsearch-refresh-branch-auth

Use the returned name below if it differs. Read its password:

kubectl -n dev get secret elasticsearch-refresh-branch-auth -o jsonpath='{.data.password}' | base64 -d

Enter this password when the client prompts.

From your terminal, open a pod shell:

kubectl -n dev exec -it elasticsearch-refresh-branch-0 -c elasticsearch -- bash

Run the following curl commands inside the pod shell. --user elastic prompts for the decoded password on each request. Requests use the database Service.

curl --silent --show-error --fail-with-body --user elastic \
  -X POST "http://elasticsearch-refresh-branch.dev.svc:9200/customers/_update/5?refresh=true" \
  -H 'Content-Type: application/json' \
  --data '{"doc":{"full_name":"Branch-only Customer 5"}}'
curl --silent --show-error --fail-with-body --user elastic \
  -X POST "http://elasticsearch-refresh-branch.dev.svc:9200/_flush"
curl --silent --show-error --fail-with-body --user elastic \
  -X GET "http://elasticsearch-refresh-branch.dev.svc:9200/customers/_count?filter_path=count&pretty"
{
  "count": 5
}
curl --silent --show-error --fail-with-body --user elastic \
  -X GET "http://elasticsearch-refresh-branch.dev.svc:9200/customers/_search?size=5&sort=id:asc&filter_path=hits.hits._source&pretty"
{
  "hits": {
    "hits": [
      {"_source": {"id": 1, "full_name": "Customer 1", "email": "[email protected]"}},
      {"_source": {"id": 2, "full_name": "Customer 2", "email": "[email protected]"}},
      {"_source": {"id": 3, "full_name": "Customer 3", "email": "[email protected]"}},
      {"_source": {"id": 4, "full_name": "Customer 4", "email": "[email protected]"}},
      {"_source": {"id": 5, "full_name": "Branch-only Customer 5", "email": "[email protected]"}}
    ]
  }
}

Run exit to return to your terminal.

Wait for the next completed refresh

kubectl -n demo get branch elasticsearch-refresh-branch -o custom-columns='NAME:.metadata.name,PHASE:.status.phase,GENERATION:.status.refreshGeneration,LAST-SUCCESS:.status.lastSuccessfulRefreshTime' --watch

Illustrative output:

NAME                   PHASE        GENERATION   LAST-SUCCESS
elasticsearch-refresh-branch Ready        <none>       2026-11-11T10:02:00Z
elasticsearch-refresh-branch Refreshing   1            2026-11-11T10:02:00Z
elasticsearch-refresh-branch Ready        1            2026-11-11T10:18:00Z

Wait for a later generation, phase Ready, and an advanced LAST-SUCCESS timestamp. An initial Ready row or an increased generation alone does not establish completion. Press Ctrl+C to stop watching. Recovery duration depends on the engine and available resources.

kubectl -n demo get branch elasticsearch-refresh-branch -o yaml

Inspect status.history, lastSuccessfulRefreshTime, and snapshot.generation. With the group-snapshot prerequisite above, snapshot.strategy is VolumeGroupSnapshot; per-volume fallback can occur if no compatible group class is available. FRESHNESS measures time since successful completion, not the source snapshot’s age.

Verify the refreshed data

Check the branch

Open a new pod/client session after recovery; the previous session may have been disconnected.

Discover the auth Secret referenced by elasticsearch-refresh-branch:

kubectl -n dev get elasticsearch elasticsearch-refresh-branch -o jsonpath='{.spec.authSecret.name}{"\n"}'
elasticsearch-refresh-branch-auth

Use the returned name below if it differs. Read its password:

kubectl -n dev get secret elasticsearch-refresh-branch-auth -o jsonpath='{.data.password}' | base64 -d

Enter this password when the client prompts.

From your terminal, open a pod shell:

kubectl -n dev exec -it elasticsearch-refresh-branch-0 -c elasticsearch -- bash

Run the following curl commands inside the pod shell. --user elastic prompts for the decoded password on each request. Requests use the database Service.

curl --silent --show-error --fail-with-body --user elastic \
  -X GET "http://elasticsearch-refresh-branch.dev.svc:9200/customers/_count?filter_path=count&pretty"
{
  "count": 5
}
curl --silent --show-error --fail-with-body --user elastic \
  -X GET "http://elasticsearch-refresh-branch.dev.svc:9200/customers/_search?size=5&sort=id:asc&filter_path=hits.hits._source&pretty"
{
  "hits": {
    "hits": [
      {"_source": {"id": 1, "full_name": "Updated Customer 1", "email": "[email protected]"}},
      {"_source": {"id": 2, "full_name": "Customer 2", "email": "[email protected]"}},
      {"_source": {"id": 3, "full_name": "Customer 3", "email": "[email protected]"}},
      {"_source": {"id": 4, "full_name": "Customer 4", "email": "[email protected]"}},
      {"_source": {"id": 5, "full_name": "Customer 5", "email": "[email protected]"}}
    ]
  }
}

Run exit to return to your terminal.

Customer 1 has the source update, customer 5 has its original value, and five records remain. The branch-only edit was discarded.

Confirm the source remains unchanged by refresh

Discover the auth Secret referenced by elasticsearch-refresh-source:

kubectl -n demo get elasticsearch elasticsearch-refresh-source -o jsonpath='{.spec.authSecret.name}{"\n"}'
elasticsearch-refresh-source-auth

Use the returned name below if it differs. Read its password:

kubectl -n demo get secret elasticsearch-refresh-source-auth -o jsonpath='{.data.password}' | base64 -d

Enter this password when the client prompts.

From your terminal, open a pod shell:

kubectl -n demo exec -it elasticsearch-refresh-source-0 -c elasticsearch -- bash

Run the following curl commands inside the pod shell. --user elastic prompts for the decoded password on each request. Requests use the database Service.

curl --silent --show-error --fail-with-body --user elastic \
  -X GET "http://elasticsearch-refresh-source.demo.svc:9200/customers/_count?filter_path=count&pretty"
{
  "count": 5
}
curl --silent --show-error --fail-with-body --user elastic \
  -X GET "http://elasticsearch-refresh-source.demo.svc:9200/customers/_search?size=5&sort=id:asc&filter_path=hits.hits._source&pretty"
{
  "hits": {
    "hits": [
      {"_source": {"id": 1, "full_name": "Updated Customer 1", "email": "[email protected]"}},
      {"_source": {"id": 2, "full_name": "Customer 2", "email": "[email protected]"}},
      {"_source": {"id": 3, "full_name": "Customer 3", "email": "[email protected]"}},
      {"_source": {"id": 4, "full_name": "Customer 4", "email": "[email protected]"}},
      {"_source": {"id": 5, "full_name": "Customer 5", "email": "[email protected]"}}
    ]
  }
}

Run exit to return to your terminal.

The source retains its own update and never receives the branch-only change.

Apply the same strategy across clusters

Use the cross-cluster tutorial and add the same schedule to its Branch. Manage the original Branch on the source cluster, inspect the database on the target, and wait for a later completed generation before checking data.

See the common schedule and history fields and refresh status reference for configuration details.

Cleanup

Delete the Branch on the source cluster first. Let Courier remove its target and snapshots before deleting the source:

kubectl -n demo delete branch elasticsearch-refresh-branch --wait=true --timeout=30m
kubectl -n demo delete elasticsearch elasticsearch-refresh-source --wait=true --timeout=30m

Keep Courier, CSI, the shared backend, and OCM when used available until cleanup completes. These commands leave the namespaces in place.