New to KubeDB? Please start here.
Branch Kafka into Another Namespace
Same-cluster branching creates an independent Kafka deployment from a point-in-time snapshot within the same Kubernetes cluster. Place the branch in another namespace to prepare development, testing, or data analysis environments using existing data.
The branch accepts independent reads and writes without changing the source. Source changes are not continuously replicated; scheduled refreshes can replace branch data with fresh source snapshots.
Before You Begin
- Read the branching overview.
- Complete Courier setup with KubeDB and the Branch CRD. Use branching-capable Courier, provisioner, and database images.
- Ensure
KafkaVersion3.9.0is available in your KubeDB catalog. - Use Ceph RBD storage supporting copy-on-write snapshots and clones. These three-member examples use compatible VolumeSnapshot and VolumeGroupSnapshot classes, with the corresponding CSI APIs, controllers, and driver support. See snapshot configuration.
- Allow capacity for three source and three target database pods, each requesting 1200Mi of memory, plus operators and any action Jobs.
- Your account must be able to create databases and Branches, read auth Secrets, inspect snapshots and Jobs, and open pod shells.
The source uses namespace demo; the target uses dev. Replace ceph-rbd consistently if your Ceph StorageClass has another name. Reserve the names in this tutorial and create namespaces if they do not already exist.
kubectl create namespace demo
kubectl create namespace dev
Deploy the source database
Save the following as kafka-source.yaml. It creates a three-node combined broker/controller cluster:
apiVersion: kubedb.com/v1
kind: Kafka
metadata:
name: kafka-source
namespace: demo
spec:
version: 3.9.0
replicas: 3
podTemplate:
spec:
containers:
- name: kafka
resources:
requests:
cpu: 500m
memory: 1200Mi
limits:
memory: 1200Mi
storageType: Durable
storage:
storageClassName: ceph-rbd
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 2Gi
deletionPolicy: WipeOut
kubectl -n demo apply -f kafka-source.yaml
kubectl -n demo wait kafka/kafka-source --for=jsonpath='{.status.phase}'=Ready --timeout=30m
Seed and inspect the source data
From your terminal, open a pod shell:
kubectl -n demo exec -it kafka-source-0 -c kafka -- bash
Run the following Kafka commands inside this Bash shell. The operator has written the broker pod’s SASL settings to /opt/kafka/config/clientauth.properties. Use the headless Service for bootstrap; Kafka advertises the individual broker addresses after connection.
Create a single-partition topic replicated to all three nodes. flush.messages=1 makes this small demonstration flush each topic record to disk; it is not a general production tuning recommendation.
kafka-topics.sh --bootstrap-server kafka-source-pods.demo.svc.cluster.local:9092 \
--command-config /opt/kafka/config/clientauth.properties --create --topic customers --partitions 1 --replication-factor 3 --config flush.messages=1
Start the producer:
kafka-console-producer.sh --bootstrap-server kafka-source-pods.demo.svc.cluster.local:9092 \
--producer.config /opt/kafka/config/clientauth.properties --topic customers --request-required-acks all
Paste these five messages, one per line, then press Ctrl+D to leave the producer and return to the pod shell:
{"id": 1, "full_name": "Customer 1", "email": "[email protected]"}
{"id": 2, "full_name": "Customer 2", "email": "[email protected]"}
{"id": 3, "full_name": "Customer 3", "email": "[email protected]"}
{"id": 4, "full_name": "Customer 4", "email": "[email protected]"}
{"id": 5, "full_name": "Customer 5", "email": "[email protected]"}
Inspect both the end offset and the actual messages:
kafka-get-offsets.sh --bootstrap-server kafka-source-pods.demo.svc.cluster.local:9092 \
--command-config /opt/kafka/config/clientauth.properties --topic customers --time latest
customers:0:5
kafka-console-consumer.sh --bootstrap-server kafka-source-pods.demo.svc.cluster.local:9092 \
--consumer.config /opt/kafka/config/clientauth.properties --topic customers --from-beginning --max-messages 5 --timeout-ms 20000
{"id": 1, "full_name": "Customer 1", "email": "[email protected]"}
{"id": 2, "full_name": "Customer 2", "email": "[email protected]"}
{"id": 3, "full_name": "Customer 3", "email": "[email protected]"}
{"id": 4, "full_name": "Customer 4", "email": "[email protected]"}
{"id": 5, "full_name": "Customer 5", "email": "[email protected]"}
Offsets alone do not prove that the cloned messages are readable. The bounded consumer should return all five records above.
Run exit to return to your terminal.
Create the Branch
Save the following as kafka-dev.yaml:
apiVersion: courier.kubedb.com/v1alpha1
kind: Branch
metadata:
name: kafka-dev
namespace: demo
spec:
source:
databaseRef:
apiGroup: kubedb.com
kind: Kafka
name: kafka-source
namespace: demo
target:
namespace: dev
name: kafka-dev
storageClassName: ceph-rbd
resources:
requests:
cpu: 500m
memory: 1200Mi
limits:
memory: 1200Mi
deletionPolicy: Delete
kubectl -n demo apply -f kafka-dev.yaml
kubectl -n demo wait branch/kafka-dev --for=condition=Ready --timeout=60m
kubectl -n demo get branch kafka-dev
Courier creates kafka/kafka-dev and its cloned PVCs in dev; KubeDB provisions the target database.
Verify the copied data
From your terminal, open a pod shell:
kubectl -n dev exec -it kafka-dev-0 -c kafka -- bash
Run the following Kafka commands inside this Bash shell. The operator has written the broker pod’s SASL settings to /opt/kafka/config/clientauth.properties. Use the headless Service for bootstrap; Kafka advertises the individual broker addresses after connection.
kafka-get-offsets.sh --bootstrap-server kafka-dev-pods.dev.svc.cluster.local:9092 \
--command-config /opt/kafka/config/clientauth.properties --topic customers --time latest
customers:0:5
kafka-console-consumer.sh --bootstrap-server kafka-dev-pods.dev.svc.cluster.local:9092 \
--consumer.config /opt/kafka/config/clientauth.properties --topic customers --from-beginning --max-messages 5 --timeout-ms 20000
{"id": 1, "full_name": "Customer 1", "email": "[email protected]"}
{"id": 2, "full_name": "Customer 2", "email": "[email protected]"}
{"id": 3, "full_name": "Customer 3", "email": "[email protected]"}
{"id": 4, "full_name": "Customer 4", "email": "[email protected]"}
{"id": 5, "full_name": "Customer 5", "email": "[email protected]"}
Run exit to return to your terminal.
Check the target cluster
kubectl -n dev get pods,pvc -l app.kubernetes.io/instance=kafka-dev
The target has three combined nodes. Inspect the copied topic:
From your terminal, open a pod shell:
kubectl -n dev exec -it kafka-dev-0 -c kafka -- bash
Run the following Kafka commands inside this Bash shell. The operator has written the broker pod’s SASL settings to /opt/kafka/config/clientauth.properties. Use the headless Service for bootstrap; Kafka advertises the individual broker addresses after connection.
kafka-topics.sh --bootstrap-server kafka-dev-pods.dev.svc.cluster.local:9092 \
--command-config /opt/kafka/config/clientauth.properties --describe --topic customers
Expect PartitionCount: 1, ReplicationFactor: 3, and three in-sync replicas after recovery.
Run exit to return to your terminal.
Verify independent writes
Change the branch
From your terminal, open a pod shell:
kubectl -n dev exec -it kafka-dev-0 -c kafka -- bash
Run the following Kafka commands inside this Bash shell. The operator has written the broker pod’s SASL settings to /opt/kafka/config/clientauth.properties. Use the headless Service for bootstrap; Kafka advertises the individual broker addresses after connection.
Start the producer, enter the following record, then press Ctrl+D:
kafka-console-producer.sh --bootstrap-server kafka-dev-pods.dev.svc.cluster.local:9092 \
--producer.config /opt/kafka/config/clientauth.properties --topic customers --request-required-acks all
BRANCH-ONLY
kafka-get-offsets.sh --bootstrap-server kafka-dev-pods.dev.svc.cluster.local:9092 \
--command-config /opt/kafka/config/clientauth.properties --topic customers --time latest
customers:0:6
kafka-console-consumer.sh --bootstrap-server kafka-dev-pods.dev.svc.cluster.local:9092 \
--consumer.config /opt/kafka/config/clientauth.properties --topic customers --from-beginning --max-messages 6 --timeout-ms 20000
{"id": 1, "full_name": "Customer 1", "email": "[email protected]"}
{"id": 2, "full_name": "Customer 2", "email": "[email protected]"}
{"id": 3, "full_name": "Customer 3", "email": "[email protected]"}
{"id": 4, "full_name": "Customer 4", "email": "[email protected]"}
{"id": 5, "full_name": "Customer 5", "email": "[email protected]"}
BRANCH-ONLY
Run exit to return to your terminal.
Change and inspect the source
From your terminal, open a pod shell:
kubectl -n demo exec -it kafka-source-0 -c kafka -- bash
Run the following Kafka commands inside this Bash shell. The operator has written the broker pod’s SASL settings to /opt/kafka/config/clientauth.properties. Use the headless Service for bootstrap; Kafka advertises the individual broker addresses after connection.
Start the producer, enter the following record, then press Ctrl+D:
kafka-console-producer.sh --bootstrap-server kafka-source-pods.demo.svc.cluster.local:9092 \
--producer.config /opt/kafka/config/clientauth.properties --topic customers --request-required-acks all
SOURCE-ONLY
kafka-get-offsets.sh --bootstrap-server kafka-source-pods.demo.svc.cluster.local:9092 \
--command-config /opt/kafka/config/clientauth.properties --topic customers --time latest
customers:0:6
kafka-console-consumer.sh --bootstrap-server kafka-source-pods.demo.svc.cluster.local:9092 \
--consumer.config /opt/kafka/config/clientauth.properties --topic customers --from-beginning --max-messages 6 --timeout-ms 20000
{"id": 1, "full_name": "Customer 1", "email": "[email protected]"}
{"id": 2, "full_name": "Customer 2", "email": "[email protected]"}
{"id": 3, "full_name": "Customer 3", "email": "[email protected]"}
{"id": 4, "full_name": "Customer 4", "email": "[email protected]"}
{"id": 5, "full_name": "Customer 5", "email": "[email protected]"}
SOURCE-ONLY
Run exit to return to your terminal.
The source contains SOURCE-ONLY but no BRANCH-ONLY record.
Check the branch again
From your terminal, open a pod shell:
kubectl -n dev exec -it kafka-dev-0 -c kafka -- bash
Run the following Kafka commands inside this Bash shell. The operator has written the broker pod’s SASL settings to /opt/kafka/config/clientauth.properties. Use the headless Service for bootstrap; Kafka advertises the individual broker addresses after connection.
kafka-get-offsets.sh --bootstrap-server kafka-dev-pods.dev.svc.cluster.local:9092 \
--command-config /opt/kafka/config/clientauth.properties --topic customers --time latest
customers:0:6
kafka-console-consumer.sh --bootstrap-server kafka-dev-pods.dev.svc.cluster.local:9092 \
--consumer.config /opt/kafka/config/clientauth.properties --topic customers --from-beginning --max-messages 6 --timeout-ms 20000
{"id": 1, "full_name": "Customer 1", "email": "[email protected]"}
{"id": 2, "full_name": "Customer 2", "email": "[email protected]"}
{"id": 3, "full_name": "Customer 3", "email": "[email protected]"}
{"id": 4, "full_name": "Customer 4", "email": "[email protected]"}
{"id": 5, "full_name": "Customer 5", "email": "[email protected]"}
BRANCH-ONLY
Run exit to return to your terminal.
The branch contains BRANCH-ONLY but no SOURCE-ONLY record. Each topic now has six records, with different final records.
Cleanup
Delete the Branch on the source cluster first and let Courier finish removing its target and snapshots. Then delete the source database:
kubectl -n demo delete branch kafka-dev --wait=true --timeout=30m
kubectl -n demo delete kafka kafka-source --wait=true --timeout=30m
Keep Courier, the storage backend, and the OCM control plane when used available until Branch deletion completes. The commands leave the namespaces in place.

































